Lastec The Articulator 3696H, Руководство пользователя

Страница: 56 / 86

Initial Set-Up
Maintenance Checklists
3
3-26 Lastec//021819 Initial Set-Up
3.32 Maintenance Checklists
Complete the appropriate maintenance checklists in a timely manner. ( See Section 5.1 ).
3.33 Pre-Operation Equipment Inspection Checklist
Perform the following equipment inspection prior to each operation of the Articulator:

Verify that the parking brake is set.

Check the fuel level.

Verify that the fuel shut-off valve (behind and left of the operator) is in the Left or Right position.

Check engine oil level and condition.

Check the air cleaner and filter elements for contamination or debris.

Brush out and clean the radiator and hood grills.

Check coolant level and condition in overflow tank.

Check hydraulic fluid level and condition. Add if low - do not overfill. Change oil and filter if neces-
sary.

Inspect the entire hydraulic system for leaks.

Adjust hydrostatic pumps if needed.

Check both hydrostatic pump belts and tension springs for proper installation, tension and condi-
tion.

Check the gearbox oil level and condition.

Check entire area around and under gearbox for oil leaks.

Check the gearbox belts for proper tension and condition. Gearbox drive belt tension is PRESET .
Increasing the spring tension could cause serious damage. Use Lastec Part No. 056599
(spring) ONLY .

Check the mower deck drive belt and idler tension spring for proper installation, tension and con-
dition.

Clean entire mower deck area under operator seat pan of any grease, oil, fuel, grass, or debris.

Check all mower deck belts and idler tension springs for proper installation, tension, and condi-
tion.

Clean each deck under the belt covers of any grease, oil, fuel, grass, or debris.

Inspect all blades for proper installation, orientation, tightness, sharpness, and overall condition.

Be sure the seatbelt is secure and operable.

Adjust the operator seat for proper operator position.

Check that both steering controls arms are properly linked, free of debris, and operating freely.

Set the mower deck height to the desired level.

Calibrate the mower deck height adjustment rods if needed.

Check the air pressure in the rear drive tires. (18 PSI.)

Verify proper function of all gauge wheels.

Verify that all warning decals are in place, visible and legible.

Verify that all covers and safety devices are properly installed and secure.

Check that the discharge chute is clear of debris, properly mounted, and in good condition.

Inspect entire Articulator for loose or entangled parts, debris, obstructions, or neglected tools.

Verify that the battery has sufficient charge to start the engine.

Check engine for abnormal exhaust or sounds.

Check oil pressure and coolant temperature lights.

Check the mower deck lift arms for proper lifting and locking operation.

Be sure the operator seat pan and engine cover are properly closed, latched, and secure.

Record the hour meter setting if desired.

Complete the appropriate maintenance checklist ( See Section 5.1 ).