lassele LUI-150A, Инструкция по установке и эксплуатации

Страница: 9 / 36

8
9
- After unpacking, please check the product appearance. If there is damage on the product,
please contact local store.
- Please remove a packing box, tape and other packing components. If these things are not
removed, the ice maker might not be working properly.
- Please check whether installation requirements like model name and voltage are satisfied by
checking name plate.
- Please remove all accessories, enclosed with the ice maker.
- Please remove protective plastic film of the panel.
- Please check whether a compressor is fixed and the fan blade turns freely.
1. Remove all the wrapping box and tapings before you install the machine.
2. Position the icemaker in the selected permanent location.
3. Install legs at every bottom corner of the machine and level the machine. See the figure
below.
4. The legs are adjustable between 6” to 7”.
5. In case you install the machine with no legs, make the floor water resistant that you lay the
machine on. See figure 2.
6. In case you install the machine with no legs, a bumper at the bottom of the machine should
be removed beforehand.
2.4 Checklist before Installation
2.5 Setup
WARNING
- Putting objects which exceed 33lbs(15kg) might break the machine.
2.3.1 Power Connection
- For details about size of cable for power supply, please refer to the “1.1 Technical Specification”.