lassele LUI-150A, Инструкция по установке и эксплуатации

Страница: 12 / 36

12
13
2.7 Wire
WARNING
- Wiring should qualify standards of the country, state and county that the machine is
installed. Otherwise it might cause electric shock, injury, fire or death.
- Wiring should be done by a qualified electrical engineer who meets applicable national,
state and local regulations.
- The machine requires an independent power supply. See the nameplate for proper voltage and
breaker/fuse size.
- Otherwise, it might cause fuse cutout, damage on cords or parts or fire.
- The machine should be properly grounded. Otherwise, it might cause injury or death.
- Wiring should be done by a licensed electrician.
- Allowable voltage is ±10% of the standard voltage.
- Do not apply extension cords.
- Touching the control box with wet hand might cause an electric shock.
- Do not apply broken power cords. Do not tie nor convert power cords.
- Do not pull out power cords hard nor lay heavy objects on them. In case you pull out power
cords, use a plug.
- The green ground wire in the factory-installed power cord is connected to a screw on the
bracket where the cord enters the machine. If it becomes necessary to remove or
replace the power cord, be sure to connect the power cord's ground wire to this screw
upon reattachment.
- In case a power cord is broken, its manufacturer, distributor or a qualified person should replace it
for safety issue.