Laskomex Bastion Apus II, Руководство пользователя

Страница: 11 / 16

- The door release can be activated at any time during the conversation by pressing
the button
on the monitor. The release continues while the button remains pressed.
- The camera view on the monitor can be switched on at any moment by pressing the
button
(view). Pressing the button again will switch the view to the next entrance,
and pressing the button yet again will switch off the camera view.
- sequential operation. To activate voice communication in the camera view mode,
press the button (talk).
- The MVC-7002 monitor features controls for volume, brightness and colour saturation
adjustment (see Fig. 1).
ATTENTION!
The camera view is activated with a delay of approx. 2 seconds after pressing the
View/Talk button.
7. Programming mode in panel BVC-6504
Entering programming mode
1) press *, you will hear 2 short sounds
2)enter your 4 digit administrator code, you will hear 3 short sounds, red LED is flashing
you are now in programming mode
3) to exit programming mode press the * key.
Adding user codes
1)press *, you will hear 2 short sounds
2)enter your 4 digit administrator code, you will hear 3 short sounds, red LED is flashing
you are now in programming mode
3)enter the location 01 to 40 (31-40 are the latching code locations). If a series of bleeps
are heard at this point then the location has a code stored, you may proceed as this
is only a warning.
4)enter the desired 4 digit user code, if the code lock retunes immediately to the
programmiong mode base level then the code is not permitted as it already exits else
where in another locations, if the code is permitted then you will hear 3 short sounds
5)return to step 2 to enter more user codes or press the * key to exit programming
mode.
ATTENTION!
In default configuration is not programmed any user code.
DELETING USER CODES
1)press *, you will hear 2 short sounds
2)enter your 4 digit administrator code, you will hear 3 short sounds, red LED is flashing
you are now in programming mode
3)enter user location (01-40), you will hear 3 short sounds
4)press button #, you will hear 3 short sounds
5)return to step 3 to delete more codes or press the * key to exit programming mode.
11
LASKOMEX PPUH, ul. D¹browskiego 249, 93-231 £ódŸ, tel. (42) 671 88 00, fax (42) 671 88 88, e-mail: laskomex@laskomex.com.pl, http://www.laskomex.com.pl