Laski P56 RX, Руководство по эксплуатации

Страница: 26 / 59

Predátor P 56RX
26
- Measurement #1: acoustic pressure level A recorded on the RH side in the
operator's position:
LAeq = 84,0 dB.
- Measurement #2: acoustic pressure level at max. working speed on the LH
side in the operator's position:
LAeq = 83,6 dB.
Total mean sound power level at max. engine speed without load L
WA
= 103,2 dB
Guaranteed sound power level at max. engine speed without load L
WA
= 104,0 dB
All measurements taken in accordance with ČSN EN ISO 11201 and ČSN ISO
3744.
At work the operator of this machine should wear full ear protection
according to noise level.
Use
Before Putting into Operation
-
This stump cutter is delivered completely mounted and ready to
use. For servicing or spare parts contact your dealer or an authorised service.
Use always original spare parts.
- Check up the engine oil level regularly – top up if necessary. Refer to MSDS
sheets from your oil supplier and Engine Manual.
- Check up the hydraulic oil level. When the stump cutter is on level ground the
oil should be between MAX and MIN marks on the oil dipstick.
Check up the engine and hydraulic oil levels. When the stump cutter is on level
ground the oil should be between the MAX and MIN marks on the oil dipstick
(level gauge indicator). In addition to that, check up also the fuel and coolant levels
(fig. 11) – fuel volume in the tank should be sufficient for the job to be done.