Laski FZ560 T-M, Руководство по эксплуатации

Страница: 34 / 35

3 4
Flow limiters wrongly set up Check out and reset
Low oil flow from tractor Replace (repair) tractor
V-belts slack Tighten/replace V-belts
Bearings overheated Insufficient lubrication or
wrong lubricant used
Lubrication and lubricants
should be
in accordance with
recommended intervals and
sorts
Too high speed of input shaft
speed Optimal PTO shaft speed
should not exceed 540 rpm
Bearing loosened Tighten up bearing housing
bolts with required torque
Bearing noise increased Replacement
FZ 560 T-RC:
No signal No connection to tractor Plug the supply cable in the
portable lamp socket
Discharged battery
Faulty charger
Faulty remote control box Recharge the battery
SERVICE
SERVICE
Note: The note "SERVICE" in the "Remedy" column means that this operation should be done
by an authorised service only.
Waste Disposal
Any waste materials resulting from the machine operation should be disposed in accordance with
laws and regulations valid in the given country.
Protect nature and water resources against used oil, lubricants and filter elements.
Any parts of the machine should be disposed in accordance with laws and regulations valid in
the given country.
Warranty
The manufacturer provides warranty on this product for a period as stated in the enclosed Letter
of Indemnity. This warranty period begins upon delivery to the customer.
This warranty covers all failures resulted from faulty assembly, manufacture and materials.
The manufacturer bears no responsibility for damages resulted from user's wrong usage, such as:
•
Usage by an unauthorised person.