Laski FZ560 T-M, Руководство по эксплуатации

Страница: 10 / 35

1 0
- The manufacturer does not bear responsibility for any damages or injures to the third
persons, or to other equipment, resulted from disobedience to instructions given in this
manual.
- Do not put any objects or tools on the machine.
- Do not leave the machine unattended – pull out the tractor ignition key.
- When handing the machine over to another person make sure if all controls, guards and
other safety elements are complete and properly installed. They serve for your safety.
- Keep the given intervals for checks of bolted joints.
- Always after work clean up all parts of the machine (brush, cleaning rag).
- Any actions or servicing on the machine are allowed to be done only if the tractor engine is
turned off, its ignition key is pulled out and the given tractor should be blocked properly
against unwished motion (parking brake, scotch blocks). Furthermore, the coupled
machine, respectively the three-point linage, should be blocked against unwilling sinking.
If the cutting head should remain lifted then block the machine jib separately.
Type FZ 560 T-RC: turn off the remote control box and pull out the ignition key.
- When handing the machine over to another person make sure if all controls, guard
emergency switches and other safety elements are complete, functional and properly
installed. They serve for your safety.
- Do not use or attempt to start the stump cutter without the cutter guards, engine covers and
access covers securely in place. Failure to do so may result in personal injury or loss of life
- Keep the given intervals for checks of bolted joints.
- Keep the battery of the remote control box fully charged.
- Do not use petrol and similar oil products as a cleaning agent.
- Keep the machine beyond reach of open fire.
- Any transport of persons or of any load on the machine is not allowed.
- Some parts of the machine may run warm (gearings, hydraulics). Do not touch them when
the machine is still running or having been just stopped.
- Do not let the input shaft running in speed exceeding its rated value.
- The joint shaft has to be always covered by effective guards with fixing chains.
- Do not attempt to detect contingent hydraulic oil leakage directly by hand. Use always a
piece of cardboard, wooden board etc. – risk of injury by oil under high pressure.
- Carry out regular checks of hydraulic hoses for their actual condition (damage, cracks,
wear).
- While being coupled to a tractor, do not use the machine in confined or ill-ventilated
spaces. Exhaust gases from the tractor include also toxic carbon monoxide which is
colourless, odourless and tasteless.
- Do not use the machine under conditions of low visibility, especially at foggy weather,
when you may overlook persons coming.
- Do not carry out any repairs that are specified for authorised services only.
- Do not carry out any repair where its solution exceeds your experiences.
- In case of any uncertainty with operation of this machine ask your dealer to show proper
operation in practice.
- While working, particularly while transporting the coupled machine, respect all the
applicable instructions given in the tractor manual.