User manual: Pro-4000RGB
Rev: Sep/2010
page 2 of 8
Checking parts .............................................................................................................................. 2
Safety instructions ......................................................................................................................... 2
Installation safety
.......................................................................................................................... 2
OPERATING THE LASER ................................................................................................................ 3
Using the laser .............................................................................................................................. 4
Connectors ................................................................................................................................... 4
Control panel ................................................................................................................................ 4
ILDA mode ................................................................................................................................... 4
DMX mode .................................................................................................................................... 5
Maintenance / cleaning .................................................................................................................. 5
Technical specifications.................................................................................................................. 5
Change scanner ............................................................................................................................ 6
Adjustable mirror mounts............................................................................................................... 6
Troubleshooting ............................................................................................................................ 6
ILDA signal ................................................................................................................................... 7
Technical diagram ......................................................................................................................... 7
Please note ................................................................................................................................... 8
Checking parts
Please check if all listed parts are included, and are not damaged. Included:
1 x Laser projector
1 x Power cable
1 x 9-pin plug
2 x key
1 x safety cord
1 x manual
Safety instructions
If the device has been exposed to great temperature changes, do not switch it on immediately.
Condensation water may damage your device. Leave the device switched off until it has reached room
temperature.
The laser must only be used for shows. Any operation has to be attended and supervised by a skilled
and well-trained operator.
Never leave this device running unattended and keep it away from children and unauthorized persons.
Keep away from heaters and other heat sources. In order to safeguard sufficient ventilation, leave 50
cm of free space around the device.
Never direct the laser beam to people or animals.
CAUTION LASER DIODE: If you open the device for cleaning, always disconnect from mains!
HEALTH HAZARD! Never look directly into the light source, as sensitive persons may
suffer an epileptic shock!
These lasers are considered a definite eye hazard, particularly at the higher power levels, which WILL
cause eye damage. So these laser series models supplied with a key switch to prevent unauthorized
use, warning labels and aperture labels affixed to the laser.
Installation safety
Prior to installation and operation of the laser, the paths of the beams and effects should be
considered, particularly with respect to how they will reach the audience. If direct audience scanning
is desired, then the laser energy in the effects needs to be considered to decide if the effects are safe
for direct viewing. Always ensure, that the maximum permissible exposure (MPE) is not exceeded in
the area accesible to the public. So install the laser in such a way, that minimum distances and
heights ensure the MPE is never exceeded in the public area.
When setting up the laser, make sure the laser is affixed firmly, to avoid vibrations.
