Manual: DS-1000RGB, DS-1000RGB FB4
page 9 / 34
7. Modes (not available for FB4 version)
•
Automatic mode (1, 10)
Animation mode (1, 2, 10)
Your device runs in auto mode
Your device runs in auto mode
(random playback of the preset patterns):
(preset graphics):
•
DMX mode (1)
Your device runs in DMX mode if ‘1‘ is switched on
(
Attention! For output values on channel 2 and channel 3 must be >0!)
:
The DMX mode only works when a DMX controller is connected to the laser.
Use the switches 1 - 9 to set the DMX address of the laser. Each switch represents a num-
ber. To define a number use the preceding number and multiply it by 2:
Switch
1
2
3
4
5
6
7
8
9
10
Number
1
2
4
8
16
32
64
128
256
Mode
Switch
DMX The laser uses 11 DMX channels, which are explained in the following table.
Channel
Value
Function
1 Mode Select
0 - 63
Laser off
64 - 127
Sound mode
128 - 191
Auto mode
192 -255
DMX mode
2 Pattern Selection
3 Strobe Effect
4 Horizontal Movement
5 Vertical Movement
6 Zoom
7 Rotation y-axis
8 Rotation Xx-axis
9 Circular movement
10 Dot effect
11 Wave movement
12 Color selection
