ICS-KP14 Instruction Manual
01850-53-000
Page 12 of 18
Issue 3 19 January 2021
6
Fixing
6.1 Attaching the Keypad to the Backplate
Once all the wiring connections have been made, attach the
keypad to the backplate by hooking the top of the keypad
onto the backplate and swinging the bottom against the wall.
Press the keypad firmly until it clicks into place.
6.2 Removing the Keypad from the Wall
Once the keypad has been locked to the wall, a 5mm flat
screwdriver is required to release the locking latch before
it can be removed as shown below.
Ensure that the supply is turned off.
Insert the screwdriver into the recess in the bottom of the
keypad at the back and push the latch upwards to
disengage it from the case. Note that the latch is quite
secure, and some force may be needed before it releases.
When the latch is released it will be possible to tilt the
bottom of the keypad forwards and then lift it off the
backplate.
Use a 3mm flat screwdriver to disconnect the wires from
the terminals.
