06
+
+
R
R
Delete measured value
1
The mechanical counter is set to zero by pressing button 7 or lever 8.
To achieve accurate measurement results, the guide bar must be held at the same angle during
the entire measurement. A vertical position is recommended.
!
To measure from wall to wall
4
1. Position the device with the rear of
the measuring wheel against the wall.
2. Move the measuring wheel straight
to the other wall.
3. Read off the measured value and
add the diameter of the wheel.
Measurement
Fold for carrying
2
Fold out the stand
3
EN
Содержание RollPilot S12
Страница 74: ...74 ...
Страница 75: ...RollPilot S12 75 ...