LaserLiner ActiveFinder One, Руководство пользователя

Страница: 8 / 92

8
2
3
4
GB
Localising electrical voltages
Position the detector tip in the
area to be tested (e.g. cable,
socket. etc.). If voltage is present, the detector
tip lights up and a signal sounds.
For safety, check all three phase conductors (L1, L2, L3) for
the presence of voltage!
!
If the acoustic signal is weak or the battery lamp is not as
bright as it should be, replace the batteries.
!
ZOOM function
Please be aware that even if a visual signal is not displayed,
voltage may still be present. Differences in the design of the
connection socket or the nature of the insulation (thickness
and type) can affect functionality. Voltage cannot be detected
behind panels and metal covers.
!
Press the ZOOM button to
increase the sensitivity of the
device (24 V AC to 1000 V AC).
This enables voltage fields to be
located at significant distance by
moving the device over the area
to be tested. If voltage is present, the detector
tip lights up and a signal sounds.
Battery lamp
To switch on the battery lamp, press and hold down button 4.
The light switches itself off automatically as soon as the button
is released.