JOBSITE CALIBRATION CHECK
(Recommend performing calibration check once a week at minimum)
1.
Using the trivet mount or tripod, get the Quad 1000HDU precisely over your reference
point on the ground floor.
2.
Place the target / template precisely centered on the laser spot at the highest point
possible above the Quad 1000HDU. (At least 100 feet if possible) Secure the target so it
will not move.
3.
Rotate the Quad 1000HDU 180°; If using a tripod, make sure you are still positioned over
your reference point.
4.
Go back to the target and measure any change of the laser spot relative to the bulls-eye
target.
Given the dynamics and movement of structures due to temperature, wind, loads etc., the
target relation to the Quad 1000HDU laser may be moving and not providing a constant. This
should definitely be taken into consideration so as a result, depending on conditions, you could
be getting readings of
1/16 or
1/8 at the target per 100 vertical feet. If you are not
comfortable or confident with the field calibration check, have it checked by your Dealer
Service Department.
MAINTENANCE
The Quad 1000HDU requires no maintenance other than periodically cleaning the laser output
lens. Use a soft cloth with Windex or alcohol.
*NOTE: Laser must be turned OFF when cleaning the lens!
CERTIFICATION
USA EN/IEC 60824-1 2007 Class 3R
LASER SAFETY
Laser Light-Avoid Direct Eye Exposure
The maximum power output of this laser is less than 5mw. A laser safety kit is supplied with the Quad
1000HDU laser. The kit contains operator qualification cards and a sign that should be posted near the
laser whenever it is in use.
Observe the following rules:
Never look directly into a laser beam or point the beam into the eyes of others. Set the laser at a
height that prevents the beam from shining directly into people’s eyes.
DO NOT remove any warning signs from the laser.
Only properly trained people are to use this product.
Service to be performed only by factory trained personnel; unit contains no user serviceable
parts.
Содержание QUAD 1000HDU
Страница 11: ...NOTES...
