SMS to lock the alarm in progress and bring the system
back into NORMAL mode.
A progressive number (strating from 2 up to 9) is
assigned to each alarm. The assigned number will
always be indicated in the SMS messages, therefore to
block the alarm you must send the STOP command
followed by the received number.
- SMS to set the frequency of the POSITION SMS
You can program the frequency in minutes with which you want to receive
position
text
messages
.
during alarm mode
N is a number between 1 and 99 which indicate how oftern
the unit must send the position SMS. By sending an SMS
containing the text 1, the position is requested every
minute. The maximum allowed is a 99 minute time frame.
NOTE: if this command is not set differently, the position
SMS has been scheduled every 30 minutes by default
20
- STOP(N) SMS:
Stop3
SMS command:
StopN (N = number assigned)
SYSTEM FUNCTIONING
4
SMS command:
N (N = number of minutes)
- AUTOMATIC STATUS SMS
Starting from the activation date, every
the
28 day
LS6001 will send to all the stored numbers an SMS
containing: the stored phone numbers, the battery unit
level, the number of TAGs learned in memory and the
battery status of the last TAG utilised.
Warning: if the GSM signal coverage is absent (car
parked in the garage), the system will try to send a
second message; afterwards to avoid consumption, the
message will be stoped.
NOTE: STATUS SMS will be
even after resetting the unit via the RESET
send
button or after connecting the battery.
Example:
setting the time frame one
4
SMS and the ot her at
minutes.
00720000
00550000
Batt Tag OK
OK
OK