Mini clock laser user manual
- - 4 - -
Safety instruction
Once after received this product , please take and put carefully. And check cautiously that whether the
product was damaged or not during the transportation, if yes, please not use this fixture and contact local
dealers or manufacturers as soon as possible.
The applicable temperature for the lighting is below 40°C. Do not use the lighting above the
temperature.ta=40
℃
The fixture applicable widely, it must keeping clean, Please do not in overheat or dusty environment use
the device. Do not touching Chemical liquid.
Should be paid attention to the use of this product: fire, heat, electric shock, loss caused by severe or fatal
injury, in electricity or to read the instructions before installation, follow the safety instruction and pay
attention to the manual and warning signs on the equipment, if you have any other questions about how safe
operating equipment, please contact the dealer or manufacturer as soon as possible.
According to the procedures described in this operating instructions, please do not open by yourself. Any
break, please contact professionals, and must by the professional and technical personnel for repair.
Do not power in and open before installation. Let have a rest when continuous work for eight hours. It will
longer the device using lift.
Fixed installation, to prevent the strong vibration or impact of the device.
The distance between the device and the projectile to keep at least 1 meter.
Never look directly into the light source,as sensitive persons may suffer an epileptic shock(especially meant
for epileptics)!
When light output position of the device of dustproof glass breakage, cracks or
other
visible
damage, user should replace the new glass to continue to use.
Installation
When install this equipment please make sure there's no flammable surfaces (decorated things, etc) and
minimum distance of 0.5M from the equipment to the flammable.
The installation of the effect has to be built and constructed in a way that it can hold 10 times the weight
and without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety
rope.Never stand directly below the device when mounting, removing or servicing the fixture.
Description of the Device
1.
Input voltage: In AC100V~240V OUT DC12V 2A 50/60Hz
2.
Input power
：
DC12V
3.
Total power:20W
4.
Light source
：
R
：
150mw/650nm
，
G
：
50mw/532nm, B:150mw/450nm
5.
Control mode: Auto/Sound/Clock display/ keyboard/remote control
6.
Scanning system
：
10K scanner
