Laser STB-7000, Руководство пользователя

Страница: 20 / 22

17
GENERAL INFORMATION
Simple Program Recording.
Press the REC Button on the remote control to record the current program. Recording will start from the
moment the REC button pressed. Press the STOP button to end the recording. Recorded files can be
viewed through the PVR menu.
NOTE: this function requires a USB drive to be connected with enough room to record the program.
Time Shifting Live TV
While watch a TV broadcast it is possible to pause the vision and then start the playback a few minute
later. Press the PLAY/PAUSE button to the remote to pause the vision. When you ready press the
PLAY/PAUSE button again to resume viewing.
GENERAL INFORMATION
The Status bar on the bottom of the screen will indicate how far behind you viewing time is in relation to
the actual broadcast.
• Up to 1 Hour can be reviewed in this feature.
• Use the REV and FWD buttons to fast forward or Rewind the vision.
• Press the YELLOW button to enter a specific time to jump to.
• Press the STOP to end the time shifting and then press the OK button to confirm.
NOTE: this function requires a USB drive to be connected with enough room to allow the Time Shift
Function to work.
Connecting a USB Device
In most cases connecting a USB FLASH drive will be a matter of simply plugging it in to the USB port on the
STB-7000.
Please remember that HD TV requires a large amount of space to record.
Please allow approximately 4GB per hour if recording HD programs. Less space will be required for lower
resolution programs.
Connecting a 2.5” (Notebook) Hard Drive
It is recommended that 2.5” drives are connected to the STB-6000 using a powered USB hub. Only single
partition drive should be used.
Due to the power requirements of some USB drives, the USB port on this device may not be able to power
the drive.
Please ensure that the drive is formatted in FAT32 or NTFS before recording.