$Specifications
S/N
Item
Content
1 Coating Material Zinc alloy
2 User Capacity(Admin 9 groups
3 User Capacity(User) 221groups
4 Power Supply
4.8~6.SVDC (AA*4)
5 Battery Life
6000 times/ open operating
6 Low Voltage Alarm
�4.8V
7 Static Current
�70uA
8 Dynamic Current
�200mA
9
-20~55
°
(
10
20~95%
11
Working Ternp.
Working Humidity
Dimensions
L*W*H:260x69x25mm (Front/Back)
-@-
TROUBLESHOOTING
Q. The lock is not connecting to the APP.
A. Make sure the lock is in pairing mode
first
and also make sure you
are only
connecting
to 2.4GHz networks as the
5GHz band is
not
supported.
Q.
My pass code for entry is not working.
A. Check the pass code matches the user
ID and try again. If you have
forgotten a
pass code we recommend using the ADMIN
function and
deleting that pass code for
security purposes.
Q. I can't locate the "SET" button.
A. The SET button is located inside the battery compartment.
Q. I can't remember my passwords and keycode, or I would like to
factory reset the lock.
A. Press and hold the SET button for approx 7 seconds. The lock will
beep each second and stop beeping when you can let the button go.
This will factory reset the lock and the admin password to the default as
advised in this instruction manual.
The default password is:
123456
(# to confirm).
