Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
recognised authority such as Autodata.
It is our policy to continually improve our products and thus we
reserve the right to alter specifications and components without
prior notice. It is the responsibility of the user to ensure the
suitability of the tools and information prior to their use.
• Always read these instructions carefully before using the tool.
• Wear eye protection and protective gloves.
• Visually inspect all equipment before use for signs of
damage or wear and tear. Any defective or suspect
equipment should be repaired or replaced before use.
• High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
should be paid to working pressures when choosing accessories and attachments.
• Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
• All cylinders/attachments used must be rated for the same operating pressure (700 bar).
• Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
• DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
• If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
the set-up.
• DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
position use mechanical means.
• Disconnect the air supply before breaking any connections in the hydraulic system.
• Never attempt to disconnect couplings while under system pressure.
• Disconnect the air supply if the pump is not in use.
• Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
• Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
• Keep the high-pressure oil lines away from sources of heat.
• Avoid sharp bends and kinks when routing the hydraulic oil lines.
• Keep the tool clean and well-maintained. Store in case when not in use.
www.lasertools.co.uk
7862_Instructions_v2
Safety Warnings - please read
•
•
Always read these instructions carefully before using the tool.
Safety Warnings - please read
Safety Warnings - please read
Visually inspect all equipment before use for signs of
damage or wear and tear. Any defective or suspect
Visually inspect all equipment before use for signs of
Wear eye protection and protective gloves.
Visually inspect all equipment before use for signs of
Always read these instructions carefully before using the tool.
Wear eye protection and protective gloves.
Always read these instructions carefully before using the tool.
Safety Warnings - please read
Safety Warnings - please read
Safety Warnings - please read
• Before operating the pump all hose, air line and hydraulic connections must be tightened with
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
should be paid to working pressures when choosing accessories and attachments.
equipment should be repaired or replaced before use.
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
damage or wear and tear. Any defective or suspect
equipment should be repaired or replaced before use.
Visually inspect all equipment before use for signs of
damage or wear and tear. Any defective or suspect
Visually inspect all equipment before use for signs of
damage or wear and tear. Any defective or suspect
Always read these instructions carefully before using the tool.
Wear eye protection and protective gloves.
Always read these instructions carefully before using the tool.
Wear eye protection and protective gloves.
Always read these instructions carefully before using the tool.
Safety Warnings - please read
Safety Warnings - please read
•
• Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
should be paid to working pressures when choosing accessories and attachments.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
should be paid to working pressures when choosing accessories and attachments.
equipment should be repaired or replaced before use.
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
damage or wear and tear. Any defective or suspect
equipment should be repaired or replaced before use.
Visually inspect all equipment before use for signs of
damage or wear and tear. Any defective or suspect
Wear eye protection and protective gloves.
Visually inspect all equipment before use for signs of
Wear eye protection and protective gloves.
Always read these instructions carefully before using the tool.
Wear eye protection and protective gloves.
Always read these instructions carefully before using the tool.
Safety Warnings - please read
Safety Warnings - please read
•• DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
the set-up.
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
the set-up.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
should be paid to working pressures when choosing accessories and attachments.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
should be paid to working pressures when choosing accessories and attachments.
damage or wear and tear. Any defective or suspect
equipment should be repaired or replaced before use.
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
damage or wear and tear. Any defective or suspect
equipment should be repaired or replaced before use.
Visually inspect all equipment before use for signs of
damage or wear and tear. Any defective or suspect
Wear eye protection and protective gloves.
Visually inspect all equipment before use for signs of
Wear eye protection and protective gloves.
Visually inspect all equipment before use for signs of
Always read these instructions carefully before using the tool.
Wear eye protection and protective gloves.
Always read these instructions carefully before using the tool.
Safety Warnings - please read
Safety Warnings - please read
Safety Warnings - please read
•
•
Disconnect the air supply before breaking any connections in the hydraulic system.
Never attempt to disconnect couplings while under system pressure.
position use mechanical means.
Disconnect the air supply before breaking any connections in the hydraulic system.
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
position use mechanical means.
the set-up.
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
the set-up.
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
the set-up.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
should be paid to working pressures when choosing accessories and attachments.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
should be paid to working pressures when choosing accessories and attachments.
equipment should be repaired or replaced before use.
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
damage or wear and tear. Any defective or suspect
equipment should be repaired or replaced before use.
damage or wear and tear. Any defective or suspect
equipment should be repaired or replaced before use.
Wear eye protection and protective gloves.
Visually inspect all equipment before use for signs of
Always read these instructions carefully before using the tool.
Always read these instructions carefully before using the tool.
Always read these instructions carefully before using the tool.
Safety Warnings - please read
Safety Warnings - please read
Safety Warnings - please read
Safety Warnings - please read
•
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Disconnect the air supply if the pump is not in use.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply if the pump is not in use.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Disconnect the air supply before breaking any connections in the hydraulic system.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply if the pump is not in use.
Disconnect the air supply before breaking any connections in the hydraulic system.
Never attempt to disconnect couplings while under system pressure.
position use mechanical means.
position use mechanical means.
Disconnect the air supply before breaking any connections in the hydraulic system.
position use mechanical means.
Disconnect the air supply before breaking any connections in the hydraulic system.
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
position use mechanical means.
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
should be paid to working pressures when choosing accessories and attachments.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
should be paid to working pressures when choosing accessories and attachments.
equipment should be repaired or replaced before use.
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
damage or wear and tear. Any defective or suspect
equipment should be repaired or replaced before use.
Visually inspect all equipment before use for signs of
damage or wear and tear. Any defective or suspect
Visually inspect all equipment before use for signs of
Always read these instructions carefully before using the tool.
Always read these instructions carefully before using the tool.
Always read these instructions carefully before using the tool.
Always read these instructions carefully before using the tool.
Our products are designed to be used correctly and with care for the purpose for which they
• Keep the tool clean and well-maintained. Store in case when not in use.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Keep the tool clean and well-maintained. Store in case when not in use.
Keep the high-pressure oil lines away from sources of heat.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Keep the high-pressure oil lines away from sources of heat.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Disconnect the air supply if the pump is not in use.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply if the pump is not in use.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Never attempt to disconnect couplings while under system pressure.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply if the pump is not in use.
Disconnect the air supply before breaking any connections in the hydraulic system.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply if the pump is not in use.
position use mechanical means.
Disconnect the air supply before breaking any connections in the hydraulic system.
Never attempt to disconnect couplings while under system pressure.
position use mechanical means.
Disconnect the air supply before breaking any connections in the hydraulic system.
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
position use mechanical means.
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
should be paid to working pressures when choosing accessories and attachments.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
equipment should be repaired or replaced before use.
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
should be paid to working pressures when choosing accessories and attachments.
equipment should be repaired or replaced before use.
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Keep the tool clean and well-maintained. Store in case when not in use.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Keep the tool clean and well-maintained. Store in case when not in use.
Keep the high-pressure oil lines away from sources of heat.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Keep the high-pressure oil lines away from sources of heat.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Disconnect the air supply if the pump is not in use.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply if the pump is not in use.
Disconnect the air supply before breaking any connections in the hydraulic system.
Never attempt to disconnect couplings while under system pressure.
position use mechanical means.
Disconnect the air supply before breaking any connections in the hydraulic system.
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
should be paid to working pressures when choosing accessories and attachments.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
should be paid to working pressures when choosing accessories and attachments.
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
should be paid to working pressures when choosing accessories and attachments.
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Keep the tool clean and well-maintained. Store in case when not in use.
Keep the tool clean and well-maintained. Store in case when not in use.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Keep the tool clean and well-maintained. Store in case when not in use.
Keep the high-pressure oil lines away from sources of heat.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Keep the high-pressure oil lines away from sources of heat.
Keep the high-pressure oil lines away from sources of heat.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Keep the high-pressure oil lines away from sources of heat.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Disconnect the air supply if the pump is not in use.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply if the pump is not in use.
Disconnect the air supply before breaking any connections in the hydraulic system.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply before breaking any connections in the hydraulic system.
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
should be paid to working pressures when choosing accessories and attachments.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
should be paid to working pressures when choosing accessories and attachments.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
should be paid to working pressures when choosing accessories and attachments.
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
reserve the right to alter specifications and components without
It is our policy to continually improve our products and thus we
reserve the right to alter specifications and components without
recognised authority such as Autodata.
It is our policy to continually improve our products and thus we
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
recognised authority such as Autodata.
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
recognised authority such as Autodata.
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Keep the tool clean and well-maintained. Store in case when not in use.
Keep the tool clean and well-maintained. Store in case when not in use.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Keep the tool clean and well-maintained. Store in case when not in use.
Keep the high-pressure oil lines away from sources of heat.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Keep the tool clean and well-maintained. Store in case when not in use.
Keep the high-pressure oil lines away from sources of heat.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Keep the high-pressure oil lines away from sources of heat.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Disconnect the air supply if the pump is not in use.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply if the pump is not in use.
Disconnect the air supply before breaking any connections in the hydraulic system.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply before breaking any connections in the hydraulic system.
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
should be paid to working pressures when choosing accessories and attachments.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
should be paid to working pressures when choosing accessories and attachments.
should be paid to working pressures when choosing accessories and attachments.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
should be paid to working pressures when choosing accessories and attachments.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
should be paid to working pressures when choosing accessories and attachments.
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
prior notice. It is the responsibility of the user to ensure the
suitability of the tools and information prior to their use.
reserve the right to alter specifications and components without
prior notice. It is the responsibility of the user to ensure the
It is our policy to continually improve our products and thus we
reserve the right to alter specifications and components without
It is our policy to continually improve our products and thus we
reserve the right to alter specifications and components without
recognised authority such as Autodata.
It is our policy to continually improve our products and thus we
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
recognised authority such as Autodata.
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Our products are designed to be used correctly and with care for the purpose for which they
Keep the tool clean and well-maintained. Store in case when not in use.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Keep the tool clean and well-maintained. Store in case when not in use.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Keep the high-pressure oil lines away from sources of heat.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Keep the high-pressure oil lines away from sources of heat.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply before breaking any connections in the hydraulic system.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply before breaking any connections in the hydraulic system.
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
High-pressure hydraulic equipment can work at extremely high pressure, and careful attention
suitability of the tools and information prior to their use.
prior notice. It is the responsibility of the user to ensure the
suitability of the tools and information prior to their use.
reserve the right to alter specifications and components without
prior notice. It is the responsibility of the user to ensure the
It is our policy to continually improve our products and thus we
reserve the right to alter specifications and components without
prior notice. It is the responsibility of the user to ensure the
recognised authority such as Autodata.
It is our policy to continually improve our products and thus we
recognised authority such as Autodata.
It is our policy to continually improve our products and thus we
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
recognised authority such as Autodata.
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Keep the tool clean and well-maintained. Store in case when not in use.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Keep the tool clean and well-maintained. Store in case when not in use.
Keep the high-pressure oil lines away from sources of heat.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Keep the high-pressure oil lines away from sources of heat.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Keep the high-pressure oil lines away from sources of heat.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Never attempt to disconnect couplings while under system pressure.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply before breaking any connections in the hydraulic system.
Never attempt to disconnect couplings while under system pressure.
Disconnect the air supply before breaking any connections in the hydraulic system.
Disconnect the air supply before breaking any connections in the hydraulic system.
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
All cylinders/attachments used must be rated for the same operating pressure (700 bar).
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
Ensure the pump has sufficient oil capacity to operate the cylinder/attachment being used.
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
Before operating the pump all hose, air line and hydraulic connections must be tightened with
proper tools. Do not over-tighten, but connections should be tightened securely and leak-free.
suitability of the tools and information prior to their use.
prior notice. It is the responsibility of the user to ensure the
suitability of the tools and information prior to their use.
reserve the right to alter specifications and components without
prior notice. It is the responsibility of the user to ensure the
It is our policy to continually improve our products and thus we
reserve the right to alter specifications and components without
It is our policy to continually improve our products and thus we
recognised authority such as Autodata.
It is our policy to continually improve our products and thus we
recognised authority such as Autodata.
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Keep the tool clean and well-maintained. Store in case when not in use.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Keep the tool clean and well-maintained. Store in case when not in use.
Avoid sharp bends and kinks when routing the hydraulic oil lines.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Disconnect the air supply before breaking any connections in the hydraulic system.
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
DO NOT rely on the pump valve for positive load holding. If it is required to lock the load in
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
DO NOT exceed the rated pressure of the pump or rated capacity of the cylinder/attachment.
If working on an off centre load, pump with care. If you feel undue resistance, stop and re-adjust
prior notice. It is the responsibility of the user to ensure the
suitability of the tools and information prior to their use.
prior notice. It is the responsibility of the user to ensure the
suitability of the tools and information prior to their use.
reserve the right to alter specifications and components without
prior notice. It is the responsibility of the user to ensure the
It is our policy to continually improve our products and thus we
reserve the right to alter specifications and components without
It is our policy to continually improve our products and thus we
reserve the right to alter specifications and components without
recognised authority such as Autodata.
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Our products are designed to be used correctly and with care for the purpose for which they
Keep the tool clean and well-maintained. Store in case when not in use.
Keep the tool clean and well-maintained. Store in case when not in use.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Regularly inspect and keep the high-pressure hydraulic oil lines in good condition.
suitability of the tools and information prior to their use.
prior notice. It is the responsibility of the user to ensure the
suitability of the tools and information prior to their use.
prior notice. It is the responsibility of the user to ensure the
suitability of the tools and information prior to their use.
It is our policy to continually improve our products and thus we
reserve the right to alter specifications and components without
It is our policy to continually improve our products and thus we
It is our policy to continually improve our products and thus we
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
If applicable, the applications database and any instructional information provided has been
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
www.lasertools.co.uk
suitability of the tools and information prior to their use.
prior notice. It is the responsibility of the user to ensure the
suitability of the tools and information prior to their use.
reserve the right to alter specifications and components without
prior notice. It is the responsibility of the user to ensure the
It is our policy to continually improve our products and thus we
reserve the right to alter specifications and components without
It is our policy to continually improve our products and thus we
reserve the right to alter specifications and components without
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
If applicable, the applications database and any instructional information provided has been
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Do not use the pump if there is any evidence of damage to the high-pressure hydraulic oil lines.
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
suitability of the tools and information prior to their use.
prior notice. It is the responsibility of the user to ensure the
reserve the right to alter specifications and components without
It is our policy to continually improve our products and thus we
reserve the right to alter specifications and components without
It is our policy to continually improve our products and thus we
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
If applicable, the applications database and any instructional information provided has been
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
7862_Instructions_v2
7862_Instructions_v2
www.lasertools.co.uk
7862_Instructions_v2
7862_Instructions_v2
7862_Instructions_v2
