Preparation for Use:
Refer to Figure 1:
Seal the external pipe connections - compressed air inlet adaptor to air
inlet port
(B)
and high pressure oil line
(C)
, with high quality thread sealant or PTFE tape. If
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
material entering and contaminating the hydraulic system.
Refer to Figure 2:
Remove the plastic oil reservoir
transit cap
(F)
; this is a non-vented cap that seals the
oil reservoir during transport. Replace the transit cap
with the oil reservoir vented cap / dipstick
(G)
which
must be in place when using the hydraulic pump.
The hydraulic pump has a usable oil capacity of 1.5
litres; the oil level is correct at 12.7mm (1/2") below the
vented cap with all cylinders retracted.
If the pump is to be operated on a continuous duty
cycle for extended periods it is recommended to install
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
the Laser Tools 7432 Spring Bearing Bush Tool.
2
www.lasertools.co.uk
Ref. Description
A
Operating foot pedal
B
Air inlet port
C
High pressure oil line (1.8m)
D
Hydraulic coupling
E
Hydraulic coupling dust
cover
F
Oil reservoir transit cap
(non-vented)
G
Oil reservoir vented cap /
dipstick
Instructions
Components
Introduction
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
Introduction
Introduction
the Laser Tools 7432 Spring Bearing Bush Tool.
to repair bodywork, or remove or press-in bushes and bearings, for example with
the Laser Tools 7432 Spring Bearing Bush Tool.
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
Introduction
Introduction
Introduction
Components
Components
the Laser Tools 7432 Spring Bearing Bush Tool.
to repair bodywork, or remove or press-in bushes and bearings, for example with
the Laser Tools 7432 Spring Bearing Bush Tool.
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
Introduction
Components
Components
Components
the Laser Tools 7432 Spring Bearing Bush Tool.
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
the Laser Tools 7432 Spring Bearing Bush Tool.
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
Components
Components
Components
the Laser Tools 7432 Spring Bearing Bush Tool.
the Laser Tools 7432 Spring Bearing Bush Tool.
to repair bodywork, or remove or press-in bushes and bearings, for example with
the Laser Tools 7432 Spring Bearing Bush Tool.
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
the Laser Tools 7432 Spring Bearing Bush Tool.
the Laser Tools 7432 Spring Bearing Bush Tool.
to repair bodywork, or remove or press-in bushes and bearings, for example with
the Laser Tools 7432 Spring Bearing Bush Tool.
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
to repair bodywork, or remove or press-in bushes and bearings, for example with
the Laser Tools 7432 Spring Bearing Bush Tool.
to repair bodywork, or remove or press-in bushes and bearings, for example with
the Laser Tools 7432 Spring Bearing Bush Tool.
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
to repair bodywork, or remove or press-in bushes and bearings, for example with
to repair bodywork, or remove or press-in bushes and bearings, for example with
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
that has a multitude of applications; it can be used with attachments (not included)
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
Instructions
Instructions
to repair bodywork, or remove or press-in bushes and bearings, for example with
to repair bodywork, or remove or press-in bushes and bearings, for example with
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
inlet port
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
Refer to Figure 1:
inlet port
Preparation for Use:
Preparation for Use:
Refer to Figure 1:
Preparation for Use:
Preparation for Use:
Preparation for Use:
Instructions
Instructions
Ref. Description
A
Ref. Description
A
Ref. Description
Ref. Description
to repair bodywork, or remove or press-in bushes and bearings, for example with
to repair bodywork, or remove or press-in bushes and bearings, for example with
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
that has a multitude of applications; it can be used with attachments (not included)
This an easy to operate compressed air powered hydraulic pump (700 bar rated),
transit cap
Refer to Figure 2:
transit cap
material entering and contaminating the hydraulic system.
Refer to Figure 2:
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
material entering and contaminating the hydraulic system.
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
material entering and contaminating the hydraulic system.
Refer to Figure 1:
inlet port
(B)
Refer to Figure 1:
(B)
and high pressure oil line
Preparation for Use:
Preparation for Use:
Refer to Figure 1:
Preparation for Use:
Preparation for Use:
Preparation for Use:
Instructions
C
B
Operating foot pedal
Air inlet port
Ref. Description
Operating foot pedal
Ref. Description
Ref. Description
to repair bodywork, or remove or press-in bushes and bearings, for example with
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
that has a multitude of applications; it can be used with attachments (not included)
to repair bodywork, or remove or press-in bushes and bearings, for example with
that has a multitude of applications; it can be used with attachments (not included)
must be in place when using the hydraulic pump.
oil reservoir during transport. Replace the transit cap
with the oil reservoir vented cap / dipstick
transit cap
oil reservoir during transport. Replace the transit cap
Refer to Figure 2:
transit cap
Refer to Figure 2:
material entering and contaminating the hydraulic system.
Refer to Figure 2:
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
material entering and contaminating the hydraulic system.
and high pressure oil line
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
and high pressure oil line
Seal the external pipe connections - compressed air inlet adaptor to air
and high pressure oil line
Seal the external pipe connections - compressed air inlet adaptor to air
Hydraulic coupling
High pressure oil line (1.8m)
Hydraulic coupling
High pressure oil line (1.8m)
High pressure oil line (1.8m)
Operating foot pedal
Air inlet port
Operating foot pedal
Ref. Description
Operating foot pedal
Ref. Description
litres; the oil level is correct at 12.7mm (1/2") below the
vented cap with all cylinders retracted.
The hydraulic pump has a usable oil capacity of 1.5
litres; the oil level is correct at 12.7mm (1/2") below the
The hydraulic pump has a usable oil capacity of 1.5
must be in place when using the hydraulic pump.
with the oil reservoir vented cap / dipstick
must be in place when using the hydraulic pump.
oil reservoir during transport. Replace the transit cap
with the oil reservoir vented cap / dipstick
(F)
; this is a non-vented cap that seals the
oil reservoir during transport. Replace the transit cap
Refer to Figure 2:
; this is a non-vented cap that seals the
material entering and contaminating the hydraulic system.
Refer to Figure 2:
Remove the plastic oil reservoir
material entering and contaminating the hydraulic system.
Remove the plastic oil reservoir
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
material entering and contaminating the hydraulic system.
and high pressure oil line
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
and high pressure oil line
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
Seal the external pipe connections - compressed air inlet adaptor to air
and high pressure oil line
Seal the external pipe connections - compressed air inlet adaptor to air
F
Hydraulic coupling dust
cover
Hydraulic coupling dust
cover
Hydraulic coupling dust
Hydraulic coupling
Hydraulic coupling
Air inlet port
High pressure oil line (1.8m)
Operating foot pedal
Operating foot pedal
Operating foot pedal
cycle for extended periods it is recommended to install
If the pump is to be operated on a continuous duty
cycle for extended periods it is recommended to install
If the pump is to be operated on a continuous duty
If the pump is to be operated on a continuous duty
cycle for extended periods it is recommended to install
If the pump is to be operated on a continuous duty
vented cap with all cylinders retracted.
litres; the oil level is correct at 12.7mm (1/2") below the
vented cap with all cylinders retracted.
The hydraulic pump has a usable oil capacity of 1.5
litres; the oil level is correct at 12.7mm (1/2") below the
The hydraulic pump has a usable oil capacity of 1.5
must be in place when using the hydraulic pump.
with the oil reservoir vented cap / dipstick
must be in place when using the hydraulic pump.
oil reservoir during transport. Replace the transit cap
with the oil reservoir vented cap / dipstick
; this is a non-vented cap that seals the
oil reservoir during transport. Replace the transit cap
Remove the plastic oil reservoir
; this is a non-vented cap that seals the
Remove the plastic oil reservoir
material entering and contaminating the hydraulic system.
Remove the plastic oil reservoir
material entering and contaminating the hydraulic system.
and high pressure oil line
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
Seal the external pipe connections - compressed air inlet adaptor to air
and high pressure oil line
(C)
Seal the external pipe connections - compressed air inlet adaptor to air
(C)
, with high quality thread sealant or PTFE tape. If
Seal the external pipe connections - compressed air inlet adaptor to air
dipstick
Oil reservoir vented cap /
dipstick
(non-vented)
Oil reservoir vented cap /
Oil reservoir transit cap
(non-vented)
Oil reservoir transit cap
Oil reservoir transit cap
Hydraulic coupling dust
Hydraulic coupling dust
Hydraulic coupling
High pressure oil line (1.8m)
Hydraulic coupling
High pressure oil line (1.8m)
High pressure oil line (1.8m)
22
cycle for extended periods it is recommended to install
cycle for extended periods it is recommended to install
If the pump is to be operated on a continuous duty
cycle for extended periods it is recommended to install
If the pump is to be operated on a continuous duty
vented cap with all cylinders retracted.
litres; the oil level is correct at 12.7mm (1/2") below the
vented cap with all cylinders retracted.
The hydraulic pump has a usable oil capacity of 1.5
litres; the oil level is correct at 12.7mm (1/2") below the
The hydraulic pump has a usable oil capacity of 1.5
must be in place when using the hydraulic pump.
oil reservoir during transport. Replace the transit cap
with the oil reservoir vented cap / dipstick
must be in place when using the hydraulic pump.
oil reservoir during transport. Replace the transit cap
with the oil reservoir vented cap / dipstick
; this is a non-vented cap that seals the
oil reservoir during transport. Replace the transit cap
Remove the plastic oil reservoir
; this is a non-vented cap that seals the
Remove the plastic oil reservoir
; this is a non-vented cap that seals the
material entering and contaminating the hydraulic system.
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
material entering and contaminating the hydraulic system.
, with high quality thread sealant or PTFE tape. If
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
material entering and contaminating the hydraulic system.
Seal the external pipe connections - compressed air inlet adaptor to air
, with high quality thread sealant or PTFE tape. If
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
Seal the external pipe connections - compressed air inlet adaptor to air
, with high quality thread sealant or PTFE tape. If
Seal the external pipe connections - compressed air inlet adaptor to air
Seal the external pipe connections - compressed air inlet adaptor to air
dipstick
(non-vented)
Oil reservoir vented cap /
(non-vented)
Oil reservoir vented cap /
Oil reservoir transit cap
(non-vented)
Oil reservoir transit cap
Oil reservoir transit cap
Hydraulic coupling dust
Hydraulic coupling dust
High pressure oil line (1.8m)
High pressure oil line (1.8m)
cycle for extended periods it is recommended to install
If the pump is to be operated on a continuous duty
cycle for extended periods it is recommended to install
vented cap with all cylinders retracted.
If the pump is to be operated on a continuous duty
vented cap with all cylinders retracted.
litres; the oil level is correct at 12.7mm (1/2") below the
vented cap with all cylinders retracted.
The hydraulic pump has a usable oil capacity of 1.5
litres; the oil level is correct at 12.7mm (1/2") below the
must be in place when using the hydraulic pump.
The hydraulic pump has a usable oil capacity of 1.5
must be in place when using the hydraulic pump.
with the oil reservoir vented cap / dipstick
must be in place when using the hydraulic pump.
oil reservoir during transport. Replace the transit cap
with the oil reservoir vented cap / dipstick
oil reservoir during transport. Replace the transit cap
with the oil reservoir vented cap / dipstick
Remove the plastic oil reservoir
; this is a non-vented cap that seals the
Remove the plastic oil reservoir
material entering and contaminating the hydraulic system.
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
material entering and contaminating the hydraulic system.
, with high quality thread sealant or PTFE tape. If
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
, with high quality thread sealant or PTFE tape. If
, with high quality thread sealant or PTFE tape. If
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
Seal the external pipe connections - compressed air inlet adaptor to air
, with high quality thread sealant or PTFE tape. If
Seal the external pipe connections - compressed air inlet adaptor to air
Oil reservoir vented cap /
Oil reservoir vented cap /
Oil reservoir transit cap
cycle for extended periods it is recommended to install
If the pump is to be operated on a continuous duty
cycle for extended periods it is recommended to install
If the pump is to be operated on a continuous duty
vented cap with all cylinders retracted.
The hydraulic pump has a usable oil capacity of 1.5
litres; the oil level is correct at 12.7mm (1/2") below the
The hydraulic pump has a usable oil capacity of 1.5
litres; the oil level is correct at 12.7mm (1/2") below the
The hydraulic pump has a usable oil capacity of 1.5
must be in place when using the hydraulic pump.
(G)
which
must be in place when using the hydraulic pump.
oil reservoir during transport. Replace the transit cap
which
; this is a non-vented cap that seals the
oil reservoir during transport. Replace the transit cap
; this is a non-vented cap that seals the
material entering and contaminating the hydraulic system.
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
, with high quality thread sealant or PTFE tape. If
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
Seal the external pipe connections - compressed air inlet adaptor to air
, with high quality thread sealant or PTFE tape. If
Seal the external pipe connections - compressed air inlet adaptor to air
Oil reservoir vented cap /
cycle for extended periods it is recommended to install
If the pump is to be operated on a continuous duty
cycle for extended periods it is recommended to install
If the pump is to be operated on a continuous duty
litres; the oil level is correct at 12.7mm (1/2") below the
The hydraulic pump has a usable oil capacity of 1.5
litres; the oil level is correct at 12.7mm (1/2") below the
The hydraulic pump has a usable oil capacity of 1.5
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
, with high quality thread sealant or PTFE tape. If
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
Seal the external pipe connections - compressed air inlet adaptor to air
, with high quality thread sealant or PTFE tape. If
Seal the external pipe connections - compressed air inlet adaptor to air
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
If the pump is to be operated on a continuous duty
cycle for extended periods it is recommended to install
If the pump is to be operated on a continuous duty
cycle for extended periods it is recommended to install
If the pump is to be operated on a continuous duty
litres; the oil level is correct at 12.7mm (1/2") below the
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
, with high quality thread sealant or PTFE tape. If
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
Seal the external pipe connections - compressed air inlet adaptor to air
, with high quality thread sealant or PTFE tape. If
Seal the external pipe connections - compressed air inlet adaptor to air
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
cycle for extended periods it is recommended to install
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
using tape, apply carefully, ensuring the first two threads are free of tape, to prevent any tape
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
