Laser Technology, Inc. TruPulse L2 User’s Manual 1st Edition
Section 2 - Getting Started
Page 5
Copyright© 2023, Laser Technology, Inc. All rights reserved.
Section 2 - Getting Started
Parts of the TruPulse L2
Figure 1
Battery
Your TruPulse L2 rangefinder comes with a battery already installed.
Before Using:
Powering Up
Once the battery is installed and the 4 steps are completed, press and release the FIRE button.
The display will light up to show the unit is on and ready for ranging.
NOTE The unit will power down automatically after 30 seconds of non-use.
Focus
Adjust the diopter focus until the image is sharp (“B” in Figure 1 above).
A. FIRE Button
E. Laser Transmit Lens
I. Tripod Mount
B. Diopter Focus
F. Up Arrow Button
J. Attachment Point
C. Eyepiece Lens
G. DISPLAY MENU Button
K. Battery Door
D. Laser Receive Lens
H. Down Arrow Button
L. Battery CR2
1. Open the battery door by releasing the latch and
pushing the door down (Figure 2A).
NOTE The CR2 battery is already in place.
2. Remove and discard the plastic insert that is on top
of the battery (Figure 2B).
3. Push the battery door up and latch back into place.
A
B
Figure 2
