Laser Technology, Inc. TruPulse L2 User’s Manual 1st Edition
Section 6 - System Setting Menu
Page 24
Copyright© 2023, Laser Technology, Inc. All rights reserved.
Pulse Settings
The TruPulse L2 has a Pulse Motor to help indicate the target has been acquired. This feature provides short
vibrating pulses/bursts to give a tactile confirmation and to reinforce that the laser has locked on the target.
A measurement will be displayed at the same time a vibration is felt along with a low audible vibration.
To change Pulse On/Off:
1. Press-and-hold Display/Menu button, then press Up or Down Arrow buttons to scroll until the Pulse
option screen is displayed. The last option chosen will be displayed.
2. Press Display/Menu button to enter option selections, the icon will be display indicating the On or Off.
Then press the Up or Down buttons to scroll though options.
3. Press Fire button to select option.
4. Ready to take measurement with selected option.
NOTE There is no icon for Pulse option.
5. Repeat steps to change option.
Pulse Settings Workflow
Figure 2
4
