Laser Technology TruPulse 200X, Руководство пользователя

Страница: 38 / 62

Laser Technology, Inc. TruPulse 200X User's Manual 1
st
Edition
Page 34
 SD Slope Distance

INC Inclination INC
 HD Horizontal Distance

VD Vertical Distance
 HT Height Routine
 ML Missing Line Routine
Section # 5 - Measurement Modes
When you power ON the TruPulse 200X, the last used Measurement Mode will be active.
Press
or to display the previous or next Measurement Mode. Figure #26 shows
the six different types of measurements that the TruPulse 200X can take. For information
about the Missing Line Routine, see
page 41 .
= Measured
= Calculated
Distance Measurements
The basic steps for taking any distance measurement:
1.
Look through the eyepiece and use the crosshair to aim to the target.
2.
Press-and-hold . The laser indicator is displayed while the laser is active.
The laser will remain active for a maximum of 10 seconds while acquiring data
about the target.
o
If the target is not acquired in the 10 second period, release and
repeat this step.
3.
Once the measurement is displayed, release . The measurement will be displayed
steady until you press any button or the unit powers OFF.
Figure #26