Laser Technology TruPulse 200X, Руководство пользователя

Страница: 24 / 62

Laser Technology, Inc. TruPulse 200X User's Manual 1
st
Edition
Page 20
Section 4 – System Setup Mode
The System Setup Mode can be accessed from the Measurement Mode at any time by
pressing
. To view each option, press
. To exit System Setup
press
.
Each option is described separately in the following sections.

Brightness

Units

Filter

Targeting Modes

Continuous

Gate

Baud Rate

Bluetooth

Firmware Version

Inclination Offset
Brightness
1.
Press .
2.
Short press until the desired setting is achieved.
It's easy to get the desired setting if you look
through the eyepiece while making the adjustment.

The LED in-scope display has five
intensity settings from DIM (1) to
BRIGHT (5).

Each time you press , the "brxx" value
increases by 1.

If you press the button while “br05” is
displayed, you will see “br01” next.
3.
Press to accept the brightness level and return to
the Measurement screen.
 Each time the TruPulse 200X is powered ON, it will return to the same
brightness setting that was last used.
Figure #12