Laser Technology TruPulse 200L, Руководство пользователя

Страница: 20 / 28

Laser Technology, Inc. TruPulse 200L User's Manual 1
st
Edition
Page 16
Notes about Measurements
 Press or to scroll through the individual measurement functions
and see the results acquired for each function.
• Both inclination and distance are measured in the
Horizontal Distance
, Slope Distance , and
Vertical Distance modes.
•
Example Range Measurement: = 12.5 meters
= 1.6 meters
= 12.6 meters
= 7.3 degrees
•
When you scroll to the Height Function , the Main Display
will be blank and the
will be flashing.
•
In the Inclination Mode , the Main Display will be blank for
all other measurement functions since the laser is not active when
measuring inclination only.
•
The last measurement does not need to be cleared before
acquiring your next target.
•
Each time the TruPulse 200L is powered ON, it will return to the
same measurement mode that was last used.
Inclination Measurements
The laser is not active in the Inclination Measurement Mode. Generally, the
inclination is measured when you press . However, in (1) the Continuous Target
Mode and (2) in the Height Measurement Mode , the inclination reading appears in
the Main Display and the display updates as your aiming point changes as long as you
press
.
Percent Slope
Percent slope, indicated by , is a calculation equal to 100 times the tangent of the
inclination angle. It is a variant way of expressing the inclination. You can get percent
slopes only in the basic measurement displays, never in the Height measurement displays.
Note also that the instrument never downloads a percent slope. It always downloads the
inclination angle.

An inclination angle of 5 degrees for example is equal to a slope of
about 8.75 percent.