Laser Technology TruPulse 200L, Руководство пользователя

Страница: 13 / 28

Section 3 - Basic Operations
Page 9
Display Indicators
Figure #6 shows the LCD in-scope display. The
TruPulse 200L’s internal software is organized into
options. Each option represents a specific measurement
or setup function and has a corresponding display
indicator. Refer to the figure and table below for
information about each indicator.
Main
Display
Displays messages and measurement results.
Percent Slope Inclination measurement units.
Degrees
Feet
Distance measurement units. Selection available in
the System Setup Mode.
Meters
Yards
Battery
Status
Flashing: battery voltage is low.
Steady: battery voltage is too low for system
operation.
Not Visible: battery voltage is within acceptable
range.
Crosshair
Serves as the aiming point reference, both
horizontally and vertically.
Laser
Status
Visible: laser is firing.
Not Visible: laser is not active.
Continuous
Target Mode
The unit continuously acquires targets and displays
measurements while is held down. The distance
to the most recently acquired target is displayed.
Figure #6