THANKYOU FOR PURCHASING THE HOGNOSE FROM
"LASERCUTPLANES.CO.UK"
PLEASE READ THE MANUAL BEFORE STARTING TO FAMILIARISE
YOURSELF WITH THE BUILD PROCEDURE.
1:- The kit is supplied in 6 laser cut sheets. Sheets 1 to 5 are 1/16th
balsa. Sheet 6 is 1mm ply. There is also a bag of accessories
containing push rods, undercarriage wire, wheels etc.
2:- The items are held in place on the sheets by small tabs. These tabs
need to be cut through carefully in order to remove the items. Also due
to the varying density of the balsa there may be the odd place that the
laser has not cut fully through and any areas like this also need to be
cut through. A scalpel with a no11 blade is ideal for this.
3:- We find it best to leave the items on the sheets until they are
needed for the build. This way any small items are less likely to get lost
.
4:- The instructions which follow assume you are using the motor,
gearbox and receiver which can be bought as optional extras to the kit.
If you are NOT using these items then certain modifications will need to
be made to facilitate the fitting of any alternative parts.
5:- The plane is designed for indoor flying or for outdoor in flat calm
conditions.
Specification.
Wing span = 490mm
Overall length = 400mm
Flying weight, (Including battery) = < 58 grms.
General Comments.
Please read before starting.
March 19, 2018
Version 1.1