Laser Atlanta SpeedLaser S, Руководство пользователя

Страница: 28 / 40

29
Audio
Toggling the beeper tone ON and OFF
MENU B
# Action Key
1 Turn On PWR
2 Select MENU MENU
3 Select AUDIO B
4 Select preference Off | Valid | Quality A | B | C
If selection A: Off is NOT selected, the unit will emit a short beep each
time a menu key is pressed.
If selection B: Valid Result or C: Quality Chirp are selected, the audio
beeper will sound for the following conditions:
Valid Result The beeper will emit a tone when a valid speed or
distance measurement is made.
Quality Chirp When the SpeedLaser
®
is making a speed or distance
measurement (in Range Average or Real-time Range
modes only), a tone representative of the quality of
the received laser signal is sounded. When strong
laser returns are acquired, the tone will be solid.
Weaker returns will give a weaker, broken tone.
NOTE : The following conditions will signal an alarm regardless of the
settings on this menu page.
Voltage Low A solid tone will sound when the voltage is low.
Fail Any failure mode will sound a solid tone.
PWR MENU BACK
A B C D
FIRE
LCD HUD
AUDIO MENU Pg B
A:Off
B:Valid Result
C:Quality Chirp