Laser Atlanta SpeedLaser S, Руководство пользователя

Страница: 15 / 40

16
Chapter 3
Speed Measurement
When the SpeedLaser ® is first turned ON, it automatically and quickly
runs the self-test function. To capture a speed, simply follow the
procedure below when the self-test is complete.
M
EASURING
S
PEED
NOTE: Always verify operational procedures for Alignment Check.
1.
Align the HUD Sighting Reticule (+ symbol in the HUD) on the
target you wish to measure the speed of.
2.
Squeeze and hold the Handle Trigger until the speed is
displayed.
3.
Release the Handle Trigger to stop measurement and lock
information in the HUD and on the LCD.
The speed will be shown in three places…twice on the rear right of the
LCD and also in the HUD (when selected) character display. Notice that
two of the speed displays are truncated to the nearest mph.
The distance to the target will be shown on the left side of the LCD.
NOTE : Pressing the trigger will take you to the Speed Display Page
regardless of any other mode the SpeedLaser
®
may be in. (The exception
is when in the TEST mode.)
- 13
HUD Speed
Display
LCD
Speed
Display
LCD
Range
Display