6
Copyright 2005 Laser Arts
9.
Glue the 1/8” F7 doublers into place like you did with the F6 doublers from step 6. (Boom shown for reference ONLY)
10.
Now, glue into place the ¼” triangle stock VERTICAL reinforcements as shown on the plan as the images below.
11.
Glue into place the ¼” triangle stock HORIZONTAL reinforcements as shown in the images below and on the plan.
12.
Glue 2 of the 1/8” balsa FRONT wing mount parts with holes in them together (engraved with “WM”). Glue the other 2 1/8” balsa
REAR wing mount parts (without holes) together. Make sure you get them glued together with the outside edges flush.
