2
Copyright 2005 Laser Arts
Kit Contents:
1.
CAD Plan Sheet
2.
Instruction Manual
3.
2 ea. Pushrod Housings with Wires
4.
CF Boom
5.
Laser Cut Balsa and Plywood Sheets (Bagged)
6.
Stick Wood Set
•
4 ea. 3/32” x 3/8” x 24-3/4” Balsa
•
2 ea. 3/32” x 3/8” x 6” Balsa
•
2 ea. ¼” x ¼” x 24” Balsa
•
2 ea. ¼” Triangle x 18” Balsa
7.
Small Hardware Bag
•
2 ea. 4-40 Nylon Bolts
•
2 ea. 4-40 Blind Nuts
•
1 ea. CF Tube x 2”
•
2 ea. Heat Shrink Tubing
•
4 ea. 1/32” Plywood Control Horns
8.
Composites Bag
•
1 ea. 3/4oz Fiberglass Cloth
•
1 ea. 2 oz Fiberglass Cloth
•
2 ea. ¼” x 50” CF Uni-Web
•
1 ea. ¼” x 20” CF Uni-Web
Recommended Items for Finishing:
1.
1 Roll Lightweight Covering (So-Lite or Similar)
2.
Epoxy Finishing Resin or water based Minwax Polycrylic
Suggested Electronics:
1.
2 Channel Transmitter Minimum
2.
2 ea. Sub Micro Servos (HS-55, GWS Pico, or equivalent)
3.
Micro Receiver, (2 channel minimum)
4.
4 cell 300 mAh AAA NiMH battery pack
Other Items That You Should Have:
1.
CA (Super Glue, thin and thick)
2.
White-glue (PVA, Elmers, etc.)
3.
15 or 30 Minute Epoxy
4.
Epoxy finishing resin (or thinned out 30 minute epoxy), or Minwax, or CA for fiberglassing the tails.
5.
Plastic Wrap or Wax Paper
6.
X-Acto Knife and Blades
7.
Razor Plane and Sandpaper
8.
Clamps
