1
Visit
www.lascarelectronics.com/software/
panelpilot-m
to download PanelPilot M
software onto your PC.
2
Remove rear panel to access USB port
and connect the device to your PC using the
CABLE IP-12W-RA (not supplied).
3
Open up the software on your PC and
follow step-by-step instructions for
configuring your display.
Configuring your display
Getting to know your display
Accessories
What’s in the box?
- Panel meter
- Fixing kit
- Quick start guide
- CABLE IP-12W-RA
Panel Mounting Range
The SGD 24-M-IP can be fitted into
panels of up to 10.5mm deep. A
rubber seal is included to seal the
mounting hole when the 32mm nut
is fully tightened. Panel mounting
hole cut-out is DIA 33mm.
Mounting bezel
TFT/touch screen
IP67 Connection
Back plate
Issue 2 07/2018
