- 8 -
Click
Click
DISCONNECTING
11.
CONNECTING
9-10. Connecting the BuggyBoard
Hold the base of the arms (80300/80301)
and push both red buttons. Adjust the width
of the arms and click them in to the con-
nectors then release the buttons. Make sure
the arms are set an equal distance from the
center of the board and the cotter pins are
locked in the connectors.
Levelling the platform
Unlock the height adjuster and rotate the
platform until level, then lock.
9.
10.
11. Disconnect the BuggyBoard
At the end of each connector-bolt, slide the
red release buttons down, whilst lifting the
arms up and out of the connectors.
English
IMPORTANT !
The BuggyBoard must be discon-
nected from the stroller before
folding the stroller.
Do not fold the stroller with the
BuggyBoard attached
