CHAPTER 4
OPERATION
4-9
DT-203P, DT-105P and DT-110P display series
In this example, there are 8 variables in groups of (0, 1, 2), (3, 4, 5), (6, 7) from the first line.
The other 8 variables available in the line are not used. Every line has a direction of variable
associated, which must be used to send various variables to the lines.
Up to 10 messages can be displayed simultaneously in displaying messages in EEPROM
mode, which are loaded in an internal buffer of RAM memory. If there are more than ten messages, no
more messages will be accepted until some messages from the buffer are eliminated.
There are three displaying methods:
a) Displaying the first activated message.
Set CT2=1 (Activated)
CT1, SV, SR=0 (Deactivated)
D0-D8= Nº Message
SM=1 Pulse activated >=10 mseg.
b) Displaying the last activated message.
Set CT1=1 (Activated)
CT2, SV, SR=0 (Deactivated)
D0-D8= Nº Message
SM=1 Pulse activated >=10 mseg.
