2.2.
Profinet line connection
The connection of the Profinet line in the DN-107/NN displays is carried out by means of
the RJ-45 connector located on the inside of the equipment.
To access the inside, we will open the top cover of the visualizer.
The display incorporates a module with 2 Profinet connectors.
For the connection between the display and the control device (PC/PLC), it is
recommended:
1.
Direct cable (100Base-T4, CAT 5E) if the connection is made through a Switch/Hub
2.
Crossover cable of identical characteristics if connected directly to the control device
Profinet
Power supply
connector
To connect several displays, the internal ports of the Profinet module of the visualizer can
be used (incorporates 2 ports).
PROFINET
