manualshive.com logo in svg
background image

WAL-ML-2XM-3G

Larson Electronics, LLC

 

Phone: (877) 348-9680

 Fax: (903) 498-3364 

  www.larsonelectronics.com 

4

 of 

4

 

USE AND CARE

Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment. 

Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of 

children when not in use. Inspect for good working condition prior to storage and before re-use.

 

 

REPLACEMENT PARTS

The 

WAL-ML-2XM-3G

 is designed to provide years of reliable performance. Should the need for replacement parts arise, 

please contact Larson Electronics. 

THESE INSTRUCTIONS MAY  NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS. 

SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT 

[email protected]

 OR BY PHONE AT 

1-877-348-9680

 FOR FURTHER ASSISTANCE. 

PLEASE VISIT LARSONELECTRONICS.COM FOR 

WARRANTY

 AND 

RETURN

 INFORMATION.

Содержание WAL-ML-2XM-3G

Страница 1: ...ou will need a 2 square head drill bit and a drill to do this Once you have removed the wood framing you will be able to remove the generator cart light head and mast Installing Light Mast Video available see below installation steps for link 1 First remove light head from shipping mast by loosening T handle screw and lifting it off 2 Remove shipping mast by removing the hardware holding it in pla...

Страница 2: ...y not lower properly Keep an eye on the winch cable and mast as you lower it to ensure it is still moving down If mast stops and cable has slack turn winch clockwise again to put the tension back on the cable and try lowering it again Do not overextend the mast past it s 12 max height as this could cause damage to the cable or pulleys and cause the mast to come down in an uncontrolled manner causi...

Страница 3: ... the engine fails to keep running try pulling the starter cord one more time Once generator is warmed up and revs have stabilized you may connect the lights to the receptacle on the generator Light head is fitted with a twist lock plug that must be turned in the receptacle to secure it To turn the generator off flip the STOP RUN switch to the STOP position Maintenance Check the oil regularly as sh...

Страница 4: ... condition prior to storage and before re use REPLACEMENT PARTS The WAL ML 2XM 3G is designed to provide years of reliable performance Should the need for replacement parts arise please contact Larson Electronics THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE ...

Отзывы: