Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
OPERATION
•
Switch: Press the button, turn on/turn off spotlight.
•
SOS Distress Signal Button: Press the button, the light will flash
as the SOS signal, 3 long flash-3 short flash.
•
Upward: Press the button, the light will turn up. Keep pressing
the button, the light will keep rotating upward (110 degrees).
•
Downward: Press the button, the light will turn down. Keep
pressing the button, the light will keep rotating downward (110
degrees).
•
Left Button: Press the button, the light will turn left. Keep
pressing the button, the light will keep rotating left (360 degrees).
•
Right Button: Press the button, the light will turns right. Keep
pressing the button, the light will keep rotating right (360
degrees).
PAIRING REMOTE
Remote should work without coding or pairing, but we do recommend coding to avoid disruption from other remotes and
devices.
HOW TO PAIR:
•
Keep the light connected to power source, press On/Off button on the remote to turn the light ON.
•
Press and hold the On/Off button for at least 6 seconds, until the light flashes 3 times (long-flash), pairing succeeded.
•
lf it flashes 3 times short-flash instead of long-flash in step 2, this means the remote was paired to this light
previously, and you just unpaired them. To pair them again please repeat step 1 and 2.
•
One light can be paired to 2 remotes at most. When a third remote is paired to the light, the first paired remote will be
removed immediately.
HOW TO UNPAIR:
•
Connect the light to a power source, keep it OFF.
•
Use any remotes, no matter if it was paired previously or not, press and hold the On/Off button for at least 6 seconds,
until the light flashes 3 times (short-flash), un-pairing succeeded.
MAINTENANCE
There are no serviceable parts inside the fixture. However, it is good practice to routinely clean and check the
fixture for proper function.
•
Disconnect power running to the lamp and be sure the fixture is cool to the touch.
•
Use a non-abrasive glass cleaning solution to clean the lens.
Note: It is not necessary to open the fixture and clean or touch the LED’s.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
Th
is spotlight
is designed to provide years of reliable performance. Should the need for replacement parts arise, please
contact Larson Electronics.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT
1-877-348-9680
FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
L
E-9XXX
Series
