background image

 

L

E-9XXX

 Series

Remote Control LED Spotlight

Instruction Manual

IMPORTANT

 

READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE 

REFERENCE. THE 

SPOTLIGHT

  MUST  BE  WIRED  IN  ACCORDANCE  WITH  NATIONAL  ELECTRICAL  CODE  AND 

ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.  

WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THIS 

PRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET, 

CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE. 

WARNING:

 

MAKE SURE POWER IS TURNED 

OFF

 BEFORE STARTING THE 

INSTALLATION OR PERFORMING ANY MAINTENANCE.

 

 

RISK OF FIRE/ELECTRIC SHOCK –

 

DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.

 

RISK OF PERSONAL INJURY –

 

FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY. 

RISK OF BURN –

 

ALLOW FIXTURE TO COOL BEFORE SERVICING. 

The LE-

9XXX

 from Larson Electronics is a 48 Watt 

Motorized LED Spotlight that operates with a handheld 

wireless remote control. This particular model is available in 

black and is magnetically mounted. It outputs a spot beam 

with an effective working length of 1,312 feet and produces 

4,320 lumens of bright, white light.

POWER

Check product label for correct input voltage!

The LE-9XXX is equipped with a Deutsch connector and a 

16` C-16-CC-CP coil cord for easy connection to cigarette 

plugs. Simply connect the coil cord via the Deutsch 

connector, and plug the cigarette cord into a compatible 

outlet outputting the correct voltage, as identified on the 

product label. 

MOUNTING

The light can be either magnetically mounted or 

permanently mounted depending on the user's desired 

application and mounting surface. 

Spotlight can be 

mounted permanently by using the 4 mounting holes in the 

base of the unit. Mounting can be achieved on any flat 

surface that is capable of supporting the load of the light, 

and which the light can be screwed or bolted to. Mounting 

hardware is not provided. Alternately, the light can also be 

temporarily mounted using the magnets at the base of the 

unit. This will work on any magnetized, flat surface that is 

capable of supporting the light. 

Larson Electronics, LLC

 

Phone: (877) 348-9680

 Fax: (903) 498-3364 

  www.larsonelectronics.com 

1

 of 

2

 

Отзывы: