included 1,500 lbs rated electric winch with 1/4" cable.
Click Image to Enlarge
Click Image to Enlarge
Click Image to Enlarge
The LM series of towers are powder coated with glossy blue finish for corrosion
resistances and aesthetics. These light masts are typically mounted to trailers or
other stable surfaces via a 28" by 28", 1/2" thick mounting base-plate which has
been drilled to accept six 1-1/4" anchor bolts. Two 3" by 6" by 1/4" thick skid
pockets at the base of the mast aid in transportation and installation of the mast.
When fully collapsed, the top stage has 24" extending from the second stage,
allowing operators to mount larger equipment without having to dismount when
collapsed.
The LM family of telescoping towers feature a proprietary mast guidance system,
which provide increased stability during high winds. When lowered to 9`, the mast
can withstand winds up to 125 mph. When elevated to its full upright position, the
mast can be rotated a full 360°. By loosening the T-Handle, operators can rotate
the mast with easy in either direction. The mast can be positioned in any direction
and locked back in place by re-tightening the T-handle. The mast itself spins freely
with easy, and can typically be rotated with a single hand.
The electric winch on this mast is offered in 120V or 240V AC 50/60 HZ. Additional
voltage options are available at an additional charge. Larson Electronics can offer
single phase and three phase AC winches, or low voltage DC winches.
This light tower weighs approximately 1,200 lbs, can easily support and lift 1,500
lbs. The entire tower assembly is shipped via common freight carrier and when
shipped measures approximately 16.5 feet long, 4 feet wide, 5 feet tall and
weighs approximately 2000 lbs. Larson Electronics can custom tailor these units to
the customer’s requirements with longer sections and larger mounting plates. For
example, the LM-30-3S is another model that reaches to a length of 30 feet, with
a 14 foot lower section, 12 foot middle section, and a 8 foot upper section and a 4
foot wide upper mounting bracket. We also offer a choice of either the manual
1,000 lbs hand winches included standard or optional electric winches.
Suggested Applications:
Temporary lighting, construction sites, and security
camera deployment. We can equip this mast with 1000W or 1500W Metal Halide
lights or a wide variety of high powered LED lights with comparable power,
including the
LEDLB-200X2E
,
LEDLB-160X2E
or
LEDLB-80x2E
.
2
Larson Electronics LLC
9419 E US HWY 175, Kemp, TX 75143
Phone: 800.369.6671
www.LarsonElectronics.com
Email: [email protected]
Fax: 903.498.3364