![background image](http://html1.mh-extra.com/html/larson-electronics/ledb-8/ledb-8_instruction-manual_3737827002.webp)
LEDB-8
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
TROUBLESHOOTING
WARNING
STROBE LIGHTS ARE HIGH VOLTAGE DEVICES AND CAN STORE LETHALAMOUNTS OF ENERGY. DO NOT
REMOVE LENS OR SERVICE UNIT IN ANYWAY WHILE IN OPERATION. DISCONNECT INCOMING POWER AT
SOURCE AND WAIT 10 MINUTES BEFORE BEGINNING ANY SERVICE ON THIS STROBE LIGHT.
PROBLEM
THINGS TO CHECK
Strobe is completely dead.
1.)
Verify that proper voltage is reaching the unit.
Strobe single flashes or flashes erratically.
1.)
Verify that the strobe is operating at the specified input
voltage.
2.)
Replace lamp with known good lamp. If problem is
cured, lamp had reached end of life.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS. SHOULD FURTHER
INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT
1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.