![background image](http://html1.mh-extra.com/html/larson-electronics/ind-tbl-bx-r13-uvc-120v/ind-tbl-bx-r13-uvc-120v_instruction-manual_3703624002.webp)
IND-TBL-BX-R13-UVC-120V
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
4
Attach supply line wires to the appropriate light fixture wires as shown in the
diagram
Secure each pair of wires according to the diagram. Utilize a junction box or
similar device
and
take
precautionary
steps
for
weatherproofing
all
connections if installed in a location where water may come in contact with the unit.
Ensure the unit is properly grounded and that wiring is done according to
all local and national electrical/building codes.
Standard Cord Cap
This
unit
comes
pre-wired
from
factory
with
the
selected
cord
cap. Take precautionary
steps
for
weatherproofing
all
connections
if
installed in a location where water may come in contact with the
unit. All outdoor installations and indoor installations near a wet location require
the use of a GFCI device for safety, according to the National Electrical
Code®
(NEC). Ensure the unit is properly grounded.
OPERATION
The IND-TBL-BX-R13-UVC-120V is a powerful sanitation solution for cleaning devices, equipment and items. Equipped with two
UVC fluorescent lamps, this system offers 10.6W of total UV output, within the 200nm - 280nm UV-C range (254 nm). The lights
have an expected lifespan of 8,000+ hours and emit a flood beam pattern. These lamps are arranged for maximum exposure at 360
degrees of coverage. Reflective surfaces at the bottom promote beam distribution during UV treatment. To use the box, individuals
place devices on a slide-out tray (18"W x 18"D x 12"H) inside the box and press the start button. This unit can disinfect devices in 60
seconds.
The 2.5' x 2' x 2' aluminum UV oven comes equipped with a spring-loaded door that automatically closes. For safety, an indicator
light turns on when the box is in use. With a recommended 60-second exposure time at full capacity, multiple units can be
purchased to clean several devices at the same time. A timer inside the box ensures the recommended duration of exposure (1-30
mins) is met every session. The UV lights can kill 99% of viruses, bacteria, mold and spores.
WIRING
This unit is equipped with 15' of 16/3 SOOW cord that is fitted with an industrial grade cord cap for easy connection to
common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground or
NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets. Alternatively, we can provide flying leads with no plug for
hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for
flying leads with no plug.
Standard pigtail(flying leads) wiring
We strongly encourage a licensed electrician install this product
, in all locations especially in outdoor areas
where weatherproofing may be required. Universal voltage driver permits operation at
120V
, 60 Hz
.
Warning:
Check product label for correct input voltage!
MOUNTING
The UV sanitation device has a flat base for stand alone operation on surfaces. We sell mounting lugs for permanent installations if
needed.
VOLTAGE
The IND-TBL-BX-R13-UVC-120V operates on 120V AC, 60Hz.