background image

 IND-HVAC-DTW-UVC-R1-SS series

Larson Electronics, LLC

 

 Phone: (800) 369-6671 

 Fax: (903) 498-3364 

 www.larsonelectronics.com 

1

 of 

10

 

Air Duct Disinfection Systems

Instruction Guide

 

These instructions generally describe the installation, operation and maintenance of the  IND-HVAC-DTW-

UVC-R1-SS series. Questions that are not specifically answerable by these instructions should be directed to  

Larson Electronics.  Larson Electronics takes all possible precautions when packaging equipment to prevent 

damage. Carefully inspect and report all damages. Do not install damaged equipment. Follow all instructions 

on any labels or tags. Carefully inspect all packing materials before discarding to prevent the loss of 

accessories, mounting hardware, spare parts or instructions.
The information and recommendations contained in this publication are based upon data collected by 

Larson Electronics and are believed to be correct. However, no guarantee or warranty of any kind, 

expressed or implied, is made with respect to the information contained herein. Specifications and 

information are subject to change without notice.

Содержание IND-HVAC-DTW-UVC-R1-SS Series











Отзывы: