Larson Electronics, LLC
Phone:
877-348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
3
BATTERY INSTALLATION
1.
Unscrew the flashlight
tail
cap.
2.
Insert (3) AA alkaline batteries paying attention to
positive/negative markings on interior of battery
chamber.
3.
Screw the
tail
cap back on making sure not to over
tighten.
MOUNTING
The EXP-LED-F4W-R2 can be mounted and carried
in several different ways.
•
Handheld -
Operators can use the flashlight in
a handheld fashion for many tasks.
•
Base Magnet -
Operators can mount the
flashlight on flat, magnetic surfaces for
convenient, hands-free operation.
•
Belt Clip -
Operators can attach the flashlight
to a belt for carrying between uses.
•
Belt Clip Magnet -
Operators can utilize the
belt clip magnet to attach the flashlight to a
magnetic area on a belt or tool belt for quick
access.
•
Lanyard Slot -
Operators can attach a lanyard
(not included) to the lanyard slot on the tail cap.
OPERATION
1. Press the light switch once to put the flashlight
into high mode (325 lumens).
a. The flashlight will run for 7 continuous
hours in high mode.
2. Press the light switch again to put the
flashlight into low mode (125 lumens).
a. The flashlight will run for 24
continuous hours in low mode.
3. Press the light switch a third time to turn the
flashlight off.
EXP-LED-F4W-R2
Содержание EXP-LED-F4W-R2
Страница 1: ...EXP LED F4W R2 INSTRUCTION MANUAL...
