Larson Davis 831C-FFT, Справочное руководство

Страница: 70 / 254

SoundAdvisor Model 831C Troubleshooting a Measurement Setup File 65
Using Single Block Timer Mode
Step 1.
Select Single Block Timer from the Run Mode drop-down menu.
a.
Enter a
Start (y-m-d)
date and
Time
, and an
End (y-m-d)
date and
Time
,
where
Time
is the time of day.
Step 2.
If desired, enable any additional settings on the Control tab, and move to
Step
8. on page 59
.
LEARN MORE
If you’re planning to use meter security (meter lock) during this
measurement, refer to Table 11.1 on page 100 to learn how these features
work together.
Using Daily Timer Mode
Use Daily Timer mode to schedule one or more measurements, which start and stop
according to the time you set, every day until the End date.
Step 1.
Select Daily Timer Mode from the Run Mode drop-down menu.
a.
Enter a
Start (y-m-d)
date and
Time
, and an
End (y-m-d)
date and
Time
,
where
Time
is the time of day.
b.
If desired, select the checkbox in-line with
2
, and
3
to enter additional
measurement periods.
Step 2.
If desired, enable any additional settings on the Control tab, and return to
Step
8. on page 59
.
LEARN MORE
If you’re planning to use meter security (meter lock) during this
measurement, refer to Table 11.1 on page 100 to learn how these features
work together.
6.3 Troubleshooting a Measurement Setup File
Setting the LD Default measurement setup as the Active setup can clear the meter when it’s
doing something unexpected and you don’t know why.
Recommended for:
unmonitored measurements
Strength:
One measurement automatically starts and
stops at the date and time you set.
Recommended for:
Work area surveys which follow a worker’s daily
schedule and account for breaks.
Strength:
Totally autonomous, daily intermittent
measurement for long or short number of days.