Lars Thrane iridium LT-3100S, Руководство пользователя и инструкция по установке

Страница: 18 / 83

LT-3100S GMDSS User & Installation Manual Rev. 1.02 Installation and Mounting
Lars Thrane A/S www.thrane.eu Page 7 of 71
The LT-3110S Control Unit interfaces are described in Interfaces on page 23 . The LT-3110S Control Unit,
front and backside view, are illustrated in Figure 2 and Figure 3.
The LT-3110S Control Unit user interface, display and buttons, are described in User Interface (UI) on page
30.
NOTE : The LT-3110S Control Unit must be mounted with either the Bracket Mount, Control Unit
(P/N: 91-100771) or Flush Mount, Control Unit (P/N: 91-100772) - illustrated in Figure 4
and Figure 5. The Flush Mount, Control Unit is not included in the LT-3100S GMDSS Satellite
Communications System
– Basic (P/N: 90-102071) and must be ordered separately.
Mounting and installation considerations:
For optimum system performance, some guidelines on where to install or mount the LT-3110S Control Unit
must be followed. It is recommended to mount the unit in a location, which fulfills these requirements:
•
Mount the unit indoor (not exposed to direct water)
•
Mount the unit using either the bracket mount or flush mount
•
Mount the unit on a rigid structure with a minimum of exposure to vibration and shock
•
Mount the unit in an area with an ambient temperature between -15°C to +55°C (+5°F to +131°F)
Figure 3: LT-3110S Control Unit (backside view).