15
NOVA 45:1/60:1
English
1 mm
•
Check the gas ring inside the support (
N39
) is undama-
ged.
•
Check the gasket (
N40
) is undamaged and correctly positio-
ned.
•
Coat the inner walls of the cylinder
(
N41
) with a thin layer of
vaseline grease.
•
Insert the motor piston
(
N42
)
into the cylinder
(
N41
) careful-
ly.
•
Fasten the cylinder
(
N41
)
on the support
(
N39
)
(respect the
position)
and at the same time insert the piston rod into the
support.
•
Turn clockwise the screws
(
N43
).
•
Insert into the motor rod
(
N44
)
the washer
(
N45
).
•
Carefully insert
the trip rod bearing
(
N46
) into the motor rod
(turn it slowly following the direction of the thread)
and screw
it on the cylinder
(
N41
).
•
Insert the rubber pad
(
N47
)
and the washer (
N48
) into the
support.
•
Screw the bush
(
N49
)
on the motor rod
(
N44
). Insert the seat
(
N50
), the washer
(
N51
)
and screw the lock nut
(
N52
).
Adjust bush and lock nut so as the rod (N44)
just out of about 1 mm from the lock nut
(see
illustration)
.
N52
N48
N43
N41
N42
N40
N39
N47
N46
N45
N44
N51
N50
N49
N44
Check gas ring
