14
NOVA 45:1/60:1
English
•
Turn counterclockwise the trip rod bearing
(
N30
)
[take care
of the washer
(
N31
)] and check the seal inside the screw
(
N30
) is undamaged.
•
Take out the screws
(
N32
)
[take care of the washers
(
N33
)]
and remove carefully the cylinder
(
N34
)
(do not bend it during
extraction in order to avoid that motor piston may damage
the internal surface of the cylinder)
.
•
Extract the motor piston from the motor support
(
N35
).
•
Verify the O-ring
(
N36
) is undamaged.
•
Tighten the lower edge of the piston rod using pliers
(see
illustration)
and unscrew the fitting
(
N37
) with a key.
•
Remove the motor rod
(
N38
)
and check it is undamaged.
•
Rub the motor rod
(
N38
)
with vaseline grease before inserting
it into the housing of the piston rod.
•
Tighten again with pliers the lower edge of the piston rod and
screw the fitting
(
N37
)
(application of a sealant on the thread
is advisable)
.
N30
N31
N32
N33
N34
N36
N35
N38
N37
Warning: tighten here
