Larius Mini Mix, Инструкция по эксплуатации и техническому обслуживанию

Страница: 5 / 48

Ediz. 010 - 09/2015
www.larius.eu
LARIUS MINI MIX
3
A
A
T
E
C
H
N
IC
A
L
D
A
TA
T
E
C
H
N
IC
A
L
D
A
TA
B B
T
E
C
H
N
IC
A
L
D
A
TA
T
E
C
H
N
IC
A
L
D
A
TA
W ATER
S OLVENT
A
WORKING PRINCIPLE
The LARIUS MINI-MIX is a bi-component mixing machine. It
therefore provides for the dosage, mixture and application of
bi-component products.
This machine allows the user to work in low, medium or high
pressure, with both airless or air assisted airless manual or
automatic spray-guns.
The dosing and the mixing of the components are regulated by
an electronic control system.
The hydraulic unit contains two flowmeters which regulate the
input of the two components into the mixing lines. It is here,
thanks to a static mixer, that the mixing of the products takes
place.
The machine is made up of 3 main units:
- The intake for the components
- The hydraulic mixing unit
- The command and control unit
ADVANTAGES OF USING THE LARIUS MINI-MIX
- The possibility of using every methodology (low-medium-high
pressure / Air assisted airless / airless painting).
- Increased product savings and consequent waste disposal
savings.
- “Ecological” painting: performed in complete respect for the
working and external environment – Quick drying (even without
a drying oven) .
- High quality finish – Less use of paint thinners during cleaning
phases.
- Increased resistance with respect to mono-component paints.
Sectors of use:
Generic metalworking, Woodworking and Furnishings,
Aerospace industry, Plastics, Bicycles and motorcycles, Automobile
components, Automobiles, Painting of furniture, chairs, doors, Varnishing,
Emulsion painting.
- The operator must possess and be familiar with the
data sheets of the 2 components (
A
and
B
).
- The operator must be familiar with the characteristics
of both the wash fluid to be used with the catalyser
B
,
and the wash fluid to be used with the product
A
.
LARIUS srl SHALL BEAR NO RESPONSIBILITY FOR ANY EVENTUAL DAMAGES DERIVING FROM THE USE OF
WASH FLUIDS INCOMPATIBLE WITH PRODUCTS
A
AND/OR
B
.
LARIUS srl SHALL BEAR NO RESPONSIBILITY FOR ACCIDENTS OR MALFUNCTIONS DERIVING FROM LACK
OF FAMILIARITY WITH THE DATA SHEETS AND THE PRODUCTS UTILISED OR RESULTING FROM THE USE OF
PRODUCTS WHICH ARE NOT COMPATIBLE WITH ONE ANOTHER.
ATENTION
- The catalyser and its relative circuit must never be
cleaned with incompatible liquids.
- Make sure that: if the product to be used is water-based,
the relative circuit within the machine is cleaned using
water. If, on the other hand, the product to be used
is solvent-based, the relative circuit must be cleaned
using a solvent.
BEFORE USING THE LARIUS MIX 2K EQUIPMENT