Ediz. 010 - 06/2015
• Put liquid PTFE on the first two spirals (
P31
) and (
P32
)
to avoid the two components coupled as shown from
unscrewing.
• Use a 36 mm spanner to screw the pump unit (
P10
).
• Make the piston stem (
P19
) completely slide.
• Use the pin (
P12
) supplied to tighten the gasket ring nut
(
P11
).
Close until it is completed tightened, without forcing.
www.larius.eu
JOLLY
27
P32
P31
P19
P11
P12
P10