Ediz. 010 - 06/2015
O
CORRECT PROCEDURE OF
DECOMPRESSION
• Insert the gun clamp (
O1
).
WARNING
:
If the equipment is still under pressure after perfor-
ming the operations above described because of
the nozzle or the flexible hose clogged, proceed
as follows:
• Loosen very slowly the gun nozzle.
• Release the clamp.
• Point the gun into the container of the product
and press the trigger to release pressure.
• Loosen very slowly the fitting of connection
from the flexible hose to the gun.
• Clean or replace the flexible hose and the
nozzle.
• Move the switch (
O2
) to the
OFF
position to stop the
equipment.
•
Reduce pressure to the minimum
(turn counterclockwise
the pressure control knob (
O3
))
.
• Disconnect the power supply cable (
O4
).
• Release the gun clamp (
O1
), point the gun into the tank
of the product and press the trigger to release pressure.
At the end of the operation, insert the gun clamp.
• Open clockwise the recirculating-safety valve (
O5
) to
release the residual pressure.
www.larius.eu
JOLLY
19
O4
O1
O3
O2
OFF
O5
Clamp inserted
Clamp released