6
English
PLA SPRAY GUN
REPLAcEMENt oF tHE SEALS oF tHE SPRAY GUN BodY
E
A
) Take out the pipe (
E1
)
B
) Remove the rod with the punch.
C
) Remove all the control part of the rod (trigger,
guard, safety, etc.)
D
) A light pressure on the rod will allow the ex-
traction of the seals (
E2
)
E
) During the disassembly of the safety lock (
E5
)
it is necessary to unlock it completely (clockwise)
and unscrew the complete part from the gun body.
Pay attention to the light residual pressure on the
main spring (
E4
), it is therefore advisable not to
expose any part of your body near to it.
During the reassembly, make sure that the safety
nut (
E5
) is locked, in order to make the insertion
and the assembly in the gun body easier.
A light pressure will be necessary to make this
possible.
A
B
C
E3
E4
E5
E2
E1
D
E
